Videos

Armalex Mask In Use

See how Armalex Mask saves you time and money. More...

White Adhesive!

Learn how High-Bond White Adhesive makes your work easier. More...

Armalex Comparison

See how Gloss, Fine Matte and Velvet Gloss compare. More...

• Home Page
• Products
  • Velvet Gloss
  • Fine Matte
  • Gloss/Gloss
  • Adhesive Mask
  • Transfer Adhesives
    • High-Bond
    • High-Bond White
    • 3M 467
    • 3M 468
• How It Works
• Buy Now
• Applications
• About Us
• Contact

Armalex Gloss/Gloss

Rigid clear Polycarbonate with a gloss top surface and a smooth sub-surface coated for thermal transfer printing. 

Armalex™ is rolled “print side” out and has a protective mask on both sides of the Polycarbonate to protect polycarbonate from blocking and scratching.

Prior to printing remove protective mask from outside wrap of roll.  Intended uses include graphic overlays for membrane switches and control panels, and sub-surface signage.

Armalex Gloss shines with vibrant colors.		Armalex Gloss has two protective masks to protect the shine...		Armalex Gloss is 10 mils thick and cuts cleanly.

Armalex Fine Matte 10 mil is a rigid clear polycarbonate with an embossed fine matte textured top surface and a smooth printable surface for printing.

Armalex 10 mil Velvet Gloss is a rigid clear polycarbonate with an embossed velvet textured top surface and a smooth printable surface for printing. For non-outdoor applications. Use “LexEdge Outdoor” or Armalex & Tuff Cover laminates for UV.

Armalex 10 mil. Gloss/Gloss10 mil reverse-print Lexan with a high-gloss top surface and a smooth surface for printing. This material has a protective mask on both sides to protect it from scratching in the production process. Not intended for long term UV exposure.

Description Rigid clear Polycarbonate with a gloss top surface and a smooth sub-surface coated for thermal transfer printing. Armalex™ is rolled “print side” out and has a protective mask on both sides of the Polycarbonate to protect polycarbonate from blocking and scratching. Prior to printing remove protective mask from outside wrap of roll. Intended uses include graphic overlays for membrane switches and control panels, and sub-surface signage.
Thickness 10 mil. without the protective liner.
Outdoor Life Intended for indoor use. May discolor over time with continuous exposure to UV light.
Shelf Life 1 year stored at 70º F and 50% RH.
AdhesiveAlthough Armalex™ does not have adhesive, pressure sensitive transfer adhesives are often used with it. Adhesives should be compatible with polycarbonates.
Service Temperature Range -40º F to 212º F
General Application Notes Remove the protective cap from the portion of the roll intended to be printed on. Once printed, use a paper interleaf between finished sheets if they are to be stacked. If you must clean the surface, use distilled water and let dry before printing. Do not expose to alcohol, strong Alkalis, Amines, Esters, Aromatic Hydrocarbons, or Ketones. Use mild detergents or sprays to clean the gloss non-print surface. USE A 45º BLADE FOR SCORE CUTTING.

Fine PrintAll of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.